Description
Features & Benefits:-
* REVO coils improve ride quality, control, & resistance to bottoming-out
* Minimal preload adjustments when changing riders, weights or loads
* Billet Aluminium 45mm smooth bore twin tube design with 25mm piston reacts quickly for improved fluid flow
* Sandvik Deflective Disc valved damping self-adjusts to frequency & ensures controlled performance
* Low friction sealing system and PTFE based sliding bearings improve performance & feel
*External knobs provide 3 adjustments for fine-tuning of rebound
* Stainless Steel tie bar design and construction
* Available in standard length shocks only for optimum ride quality and performance
* Black Type Hard Coat Anodized
* Easy Installation and Adjustment
* Sold in Pairs
Tech Tips:-
* Heavy Duty application are recommended for 110kg+ rider & passenger total weight. Also consider Heavy Duty if most of your riding is 2-UP, stunt riding, or aggressive riding style.
* Before fitting, check the front shock mount stud has approx. 57mm of exposed Thread. After fitting there should be approx. 8mm of thread protruding past the Nyloc lock nut.
* Shocks are supplied on the softest setting Sag or preload must be set prior to test riding the vehicle.
* A short, thin 7/8in. open end spanner is best to perform the Sag or preload adjustment
* Apply a liberal amount of CRC or similar penetrating lubricant to the preload Nutarea before attempting any preload adjustment
* Turn the 7/8in.AF preload adjusting nut Counter Clockwise to Increase the spring preload.
* When Increasing preload – Do NOT turn the 7/8in.AF preload adjusting nut out any further than the 3rd or final preload reference line
* Take care when placing the bike on the jack not to damage the Shock or Rebound adjusting knobs
Made by hand in Sturgis, South Dakota, USA !
